TRIPACK FILMS LTD
Synchronizing and Load sharing for 03 x Utility, 02 x HFO & 07 x Gas GEN-SETS
TOTAL IPP CAPACITY = 22.5 MW
Location: Port Qasim Karachi
our projects
PROBLEM
Customer was relying on Gas Generators for a major portion of their power Generation. The additional load requirement was fulfilled through HFO Generators, customer faces huge production losses when Gas is unavailable or Gas pressure is not adequate. The customer decided to connect Gridline to make its system fully redundant and no compromise on production in case of Gas shortage with Gas, HFO, and Grid sources are available to feed the load.
CHALLENGE
The customer had three different Power Generating sections, these are divided according to the load priorities & criticalities, they need a fully flexible and reliable system that enables the customer to utilize source available at any section to be able to feed load on any other section and they can isolate section or close section at any time during operation.
SOLUTION
Enercon Systems International (Pvt.) Ltd provided Generator Synchronization systems that have brought all power sources connected via a redundant communication line, The operation is now centralized and all possible operating scenarios can be performed via a single touch from the Master panel.
HILAL FOODS
Synchronizing and Load sharing of 07 GEN-SETS
TOTAL IPP CAPACITY = 12.4 MW
Location: Korangi Karachi
PROBLEM
All the Gas Gen-set were running at Power Mode. To sustain the factory torque (variable load) organization was using different Gen-set with different controller, however this process was inefficient.
CHALLENGE
Need a complete generator control upgrade to manage and monitor the entire power plant load to shrink the power load to make it more efficient and cost-effective.
SOLUTION
Enercon Systems International (Pvt.) Ltd set all the Gas Gen-set at Load sharing (island mode) instead of power mode which results all the Gas Generators started bearing the Torque (variable loads). The solution includes: Designing of the Power Management, Supply and Commission the Synchronization and Load Sharing System.
Soorty Enterprise Unit-14
Synchronizing and Load sharing of 05 GEN-SETS with 02 Grid & 02 Solar Power Sources
TOTAL IPP CAPACITY = 14 MW
Location: Korangi Karachi
PROBLEM
Soorty Enterprises is one of the biggest textile groups in Pakistan. They wanted to set up a new power plant – Unit 14 in Karachi and were looking for a reliable control system with exquisite quality. Enercon being in the business for more than 40 years and global partner of Caterpillar with 24/7 local support was an easy choice to take care of their lead certified power plant.
CHALLENGE
Need a complete generator control and synchronization system for paralleling of generator with each other and with Grid as well as Solar power. Also manage and monitor the entire power plant load to make it more efficient and reliable system.
SOLUTION
Enercon Systems International (Pvt.) Ltd set all the Gas Gen-set at Load sharing (island mode) and Base-load Mode (Power mode) which results in all the Gas Generators started baring the Torque (variable loads). Also, provide the provision for parallel with Grid Source and Solar Power Source. The solution includes Designing the Power Management, Supply and Commission Synchronization, and Load Sharing System. Enercon offered PLC-based architecture which offers flexibility, adaptability, and provision for future expansions. A central HMI was provided for operators monitor & Master controlling.
US Denim
Utility and Generator Synchronizing, Load-sharing and Baseload Control and of 04 GEN-SETS for Main Power plant.
TOTAL IPP CAPACITY = 5 MW CAT New installation, 2MW Existing GE Engine up-gradation
Location: Lahore, Pakistan
PROBLEM
US Denim decides to add efficient 5MW Electrical Power Generation and upgrade the existing control system due to its plant expansion and load requirement. For the power requirement, they Install 2 CAT Gas Generators. Continuous and uninterruptable Power is the first preference for the Textile and Denim industry. Enercon was chosen for the job as it is a proven renowned name & leader in customized Power generation Controls.
CHALLENGE
Need complete Generator Control, Synchronization, and up-gradation of old Synchronization control, this was the Prime source of power for complete 4 Units for US Denim.
SOLUTION
Enercon Systems International (Pvt.) Ltd supplied 1x Master Panel including existing GE Engine (Jenbacher) Control/Synchronization and 2 Generator Control Panel, Our scope include Mater panel with Synchronization System for 2 X Jenbacher engine and Utility Synchronization, Control Panel for 2X 3520H, interfacing and load sharing with 2x Jenbacher Engine and 4XCAT diesel engine which running with ComAp.
Lucky Energy Kathore
Master Control Panel with Load Management, Load Sharing, and SCADA monitoring Solution for complete 36MW Power plant
Location: Kathore, Sindh
PROBLEM
Lucky Energy has a total of 13 Gas Generators (including the Jenbacher, Caterpillar 3500 series, and CAT CG Series formerly MWM ) running parallel in the Island operation. Since all Generators were operating on different communication protocol, In the event of sudden variation in load, the response time of each generator was different, some time it could cause tripping of 1-2 Generators and eventually lead to a complete blackout of the plant, causing a huge amount of production & monetary loss for the customer.
CHALLENGE
Due to different brands of generators and control, customers could not handle the plant efficiently and the plant remained at the risk of black shutdown. Most of the Engines are running in power mode which compromises the torque bearing capacity of the plant.
SOLUTION
The site had a different brand of Engines with different proprietary controls. So, it was very complex to run the plant without equal & proportionate sharing of load among all Generators.
In order to simplify the plant operation and to avoid the risk of a blackout, Enercon provided a centralized Master panel and common load sharing controls on all generators, After commissioning of Enercon controls, the customer now can freely run any number of Generators depending on his load requirement, In addition to central monitoring of the whole plant, Master Panel also provides important functions of Load sense load Demand Management, load shedding Management, Neutral Grounding Resistor Controlling, Steam monitoring, and any additional customized data monitoring and control.
| S.no | Project Name | Plant Type | Project Description |
|---|---|---|---|
| 1 | Aga Khan University Hospital Project | University, Hospital & Shoping Malls | Design, Supply & Commission the 2 x PLC based Generator Synchroization & Control Panel for D3516B Caterpillar Diesel Generators using WAGO PLC & Siemens HMI. We also provide Swithgear panel consist of 5000A Busbar for Generator Incomming and for Load take off Feeders. |
| 2 | OGDCL Loti Gas Field Project | Oil & Gas Fields | Design, Supply & Commission the Control Switchgear with 2 x MCC 400kW at 400VAC for Standby Diesel Generators. |
| 3 | OGDCL 300kVA Project | Oil & Gas Fields | Design, Supply & Commission the 2 x Control Switchgear with Load take-off panel 280kW at 400VAC for Standby Diesel Generators. |
| 4 | Tuwairqi Steel Mills Pakistan | Steel Mills | Design, Supply & Commission the Generator Synchronization and Control Switchgear with WAGO PLC & GE HMI for D3512B at 1280kW 400VAC Diesel Generators with Power panel. |
| 5 | PDIL CPF Production Facility | Others | Design, Supply & Commission the Control Switchgear for 3 x Caterpillar Gas Generator at 1600kW 415V and 1 x Diesel Generator with (standby Emergency Power source) at 292kW 415V. |
| 6 | Fatima Fertilizer Company Limited | Food & Beverages | Design, supply & commission the Generator Synchronization & Control Panel with switchgear for 1 x D3612 Caterpillar Diesel genset with GMS module rate 2840kW at 11kV |
| 7 | Sawan Field Compression Project | Oil & Gas Fields | Design,supply & commission the Generator Synchronization & Control Panel with switchgear for 1 x D3512 Caterpillar genset with EMCP 3.3 controls for 1000kW rated at 415V |
| 8 | Artistic Milliners (Unit-2, Unit-3 & Unit-5) | Textile Mills | Design, Supply & Commission the Easicon panel for controlling and synchronizing of 4 x D3512 Caterpillar Diesel Genset rated 1200kW at 400V using DEIF GCM-7 genset controller modules. |
| 9 | OGDCL Sinjhoro | Oil & Gas Fields | Design, supply and commission the Generator Control Panel with Switchgear for 1 x D3512 Caterpillar Diesel Genset rated 1020kW at 400V |
| 10 | UEP Khaskheli | Oil & Gas Fields | Design, supply and commission the Generator Control Panel with Switchgear for 1 x D3512 Caterpillar Gas Genset rated 962KVA at 480V , the system is designed using Siemens PLC & IPC with DEIF Genset controller module. |
| 11 | MOL Makori | Oil & Gas Fields | Design, supply and commission the Generator Control Panel with Switchgear for 1 x D3512 Caterpillar Diesel Genset rated 1020kW at 400V |
| 12 | OGDCL Dhodak | Oil & Gas Fields | Design, supply and commission the Generator Control & Power Switchgear for 1 x DG3512 Caterpillar Gas Genset rated 906KVA at 415V |
| 13 | Fauji Meat Limited | Food & Beverages | Design, Supply & Commission the Auto Fuel Filling panel and Master Control Panel for 4 Cummins Diesel Generators. |
| 14 | Mari Gas Project | Oil & Gas Fields | Design, supply and commission the Generator Control & Power Switchgear for 1 x D3412 and 2 x G3516 Caterpillar Diesel & Gas Genset rated 810kVA at 400V, 1206kVA at 400V respectively. |
| 15 | Hasan Textile | Textile Mills | Design, supply and commission the Generator Control for 1 x G3512E Caterpillar Gas Genset rated 1500kVA at 400V, 50Hz.and Master Control Panel with Utility paralleling feature. |
| 16 | Rehman Cotton | Textile Mills | Design, supply and commission the Generator Control for 1 x G3512E rated 1500kVA at 400V, 50Hz, 1 x G3516C rated 1985kVA ,400V and 1 x G3520E rated 2528kVA, 400V and Master Control Panel with Utility syncrhronization feature. |
| 17 | Fauji Fertilizer Bin Qasim | Food & Beverages | Design, Supply & Commissioning of Engine Control Panel for blackout standby Mitsubishi Diesel Genset rated 1000kW for 150MW Coal Power plant. |
| 18 | OGDCL Jhal Magsi | Oil & Gas Fields | Design, supply and commission the Generator Control for 3 x Gas G3512 rated 906kVA at 400V, 50Hz., 1 x Diesel C 32 rated 1000kVA ,400V Master Control Panel . |
| 19 | Nishat Properties Ltd | University, Hospital & Shoping Malls | Design, supply and commission the Generator Control for 2 x C-175-20 3600kVA, 2880ekW at 11kV, 50H and 1 x D3512B-HD 1600kVA, 1280ekW at 11kV, 50Hz . |
| 20 | Sana Industries Pvt. Ltd | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Waukesha (VHP5904LTD) Gas Generator rated 1125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Genbacer and Waukesha Gas Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices." |
| 21 | Murree Brewery Co. Ltd. | Food & Beverages | Design, supply and commission the Generator Control Panel for 1 x Waukesha Gas Engine VHP5904-LTD rated 900kW at 400V, 50Hz . |
| 22 | WTC Project | Others | Design, Supply & Commission the Master panel for 5 x 11kV Caterpillar Engines with Grid sync feature, supply of Neutral Grounding panel with 1NGR+ 5 NGS |
| 23 | Gambat South Project | Oil & Gas Fields | Design , supply & commission of Control panel for 3512B Caterpillar Diesel Genset rated 1500kVA at 415V, 50Hz, the application is standby operation with provision of close transition load transfer to prime Gas engines |
| 24 | UEP Bukhari Project | Oil & Gas Fields | Enercon supplied E-house, our scope includes supply of Container duly painted & finished, inside Aircons, fire alarm , smoke detectors, Control Panel for 2 x G3516A Caterpillar Gas Genset rated 770KW at 480V, 60Hz , Load take OFF panels and Type 2 Form 3 Engine auxiliary MCC panel, complete interfacing between MCC & control panel. |
| 25 | NP Cotton Mills | Textile Mills | Design , supply & commision of CG 170-16 Caterpillar Gas Genset (former MWM Genset) rated 1950KVA at 11kV, 50Hz, application is to run the engine parallel with existing Caterpillar 3516 & Jenbacher JS 320 engines |
| 26 | ZIC Oil | Oil & Gas Fields | Design, Supply & Commissioning of Master Control panel for 3 x Emergency Diesel Gensets and 3 x Main Grid Incomers, fully automated System with provision of forward & Back synchronization, Zero Power transfer and Automatic Source transfer on pre-set timing. |
| 27 | Pakistan Railway Project | Others | "Design , supply & commission of 2 x D3512 Caterpillar Diesel Genset rated 1275KVA at 11kV, 50Hz and NGR Panel including 1NGR+2 NGS Local Scope: Auto Fuel filling , Engine auxiliary MCC and 24VDC , 300AH battery charger panel" |
| 28 | UEP Naimat | Oil & Gas Fields | Design, supply and commission of Generator Control for 4 x Waukesha Gas Engine VHP5904-LTD rated 900kW at 400V, 50Hz . |
| 29 | Fazal Cloth Mills Ltd | Textile Mills | Control Panel for 1 x G3520E Caterpillar Gas Genset rated 2528KVA at 415V, 50Hz, application is to run engine in parallel with existing Caterpillar gensets |
| 30 | Artistic Milliners Unit-5 | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel along with their MCC panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 11KV, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 7""inch Proface IPC for display Runtime data from Generator and field devices. -We also supplied 1 xNGR & 1x NGS Panel." |
| 31 | Artistic Milliners Unit-2 | Textile Mills | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel with MCC panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices." |
| 32 | Indus Motor Company Pvt. Ltd | Automobiles | "Design, Supply & Commissioned the 3 x PLC based Generator control and Synchronization Panel along with their MCC panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 11KV, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 7""inch Proface IPC for display Runtime data from Generator and field devices. -We also supplied 1 xNGR & 3x NGS Panel with Master Control Panel for Monitoring and Controlling of whole plant SLD with provision of Grid Synchronization." |
| 33 | North Star | Textile Mills | Control panel for 1x CG 170-16 Caterpillar Gas Genset rated 1950KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. |
| 34 | Soorty Textile Mills Unit-14 | Textile Mills | "Design, Supply & Commissioned the 3 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-20 rated 2441KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 7""inch Proface IPC for display Runtime data from Generator and field devices. -We also supplied Master Control Panel for Monitoring and Controlling of whole plant SLD with provision of Grid and Solar Synchronization." |
| 35 | Allied Rental | Others | Design, supply & commission of 1 NGR / NGS Panel |
| 36 | Shujabad Agro - Khi | Food & Beverages | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel with MCC panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices." |
| 37 | A&Z Agro Industries Pvt.Ltd | Food & Beverages | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel with MCC panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices." |
| 38 | Navy Gawadar Project | Others | Design, supply and commission of Generator Control for 1 x D3512 rated 1500kVA at 11KV, 50Hz., 1 x D3516 rated 1985kVA ,400V and 2 NGS Panel |
| 39 | Fazal Cloth Mills Ltd | Textile Mills | Control Panel for 1 x G3520H Caterpillar Gas Genset rated 3000KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. |
| 40 | Indus Dyeing & Manfacturing Company Ltd. (Multan) | Textile Mills | "Design, Supply & Commissioned the 2 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices." |
| 41 | Sunrays Textile Pvt. Ltd | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using Sices (GC-600) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 42 | Kamal Limited - Garments Division | Textile Mills | Control Panel (GCP + MCC) for 1x CG170-16 Caterpillar Gas Genset rated 1950KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. |
| 43 | Din Textile Mills Ltd. | Textile Mills | Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel with MCC panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15"inch Proface IPC for display Runtime data from Generator and field devices. |
| 44 | Diamond International Corporation Ltd. | Textile Mills | Control Panel for 2x CG 170-20 Caterpillar Gas Genset rated 2500KVA at 400V, 50Hz, Master Panel with provision for sync with Grid. |
| 45 | Murree Brewery Co. Ltd. | Food & Beverages | Control Panel (GCP + MCC) for 1x CG170-16 Caterpillar Gas Genset rated 1950KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. |
| 46 | Reliance Weaving Mills Ltd. | Textile Mills | "Control Panel for 1 x G3520H Caterpillar Gas Genset rated 3125KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel). " |
| 47 | Printech Packages Pvt Ltd | Packaging Industries | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-12 rated 1406KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel). " |
| 48 | Danpak Foods | Food & Beverages | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel). " |
| 49 | FKN Textiles | Textile Mills | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel). " |
| 50 | Masood Spinning Mills | Textile Mills | Control Panel for 1x CG260-16 Caterpillar Gas Genset (formerly MWM Genset) rated 5129 KVA at 11kV, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. along with 1 NGR + NGS Panel. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel). |
| 51 | US Denim Mills (Private) Ltd. | Textile Mills | Control Panel for2x G3520H Caterpillar Gas Genset rated 3125KVA at 11KV, 50Hz, application is to run engine in baseload & loadsharing mode with existing Jenbacher Generators. along with 1 NGR + NGS Panel. Along with Master Panel for Load sense load Demand Management, load shedding Management. Enercon also supplied retrofit controls to existing Jebacher JS 320 engines. |
| 52 | Pakistan Refinary Ltd. | Oil & Gas Fields | Enercon supplied Master Control panel using Allen bradley PLC & HMI which is centrally controlling & monitoring 4.5MW plant which includes utility Soure , Cummins Gas and Diesel Generators, Master panel is responsible for forward & back synchronization, Utility parallel operation, load shedding, load management and central monitoring of plant operation. |
| 53 | D.G. Khan Cement Company Limited | Others | 2x Generator Synchronization & Control Panel for Caterpillar Gas Genset with Auto mains failure (AMF), Auto Tranfer Switch (ATS) options. |
| 54 | Asia Generation (Pvt.) Ltd. | Power Generation Company | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-12 rated 1406KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel). " |
| 55 | NP Cotton | Textile Mills | "Design, Supply & Commissioned the 2 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-20 rated 2441KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 56 | Nadeem Textile Mills Ltd. | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-20 rated 2441KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 57 | Tayyab Textile Mills | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 11KV, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 58 | Sarfaraz Textile Mills | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 11KV, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 59 | Masood Spinning Mills Ltd. | Textile Mills | Generator Synchronization & Control Panel for 2x G3520H Caterpillar Gas Genset rated 3000KVA at 11KV, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. along with 1 Neutral Grounding Resistor - NGR + 2 Neutral GroundingSwitch - NGS Panel. |
| 60 | Masood Fabric | Textile Mills | Generator Synchronization & Control Panel for 1x G3520H Caterpillar Gas Genset rated 3000KVA at 11KV, 50Hz, we used Deepsea 8610 Genset Controller Module where application is to run engine in baseload & loadsharing mode with existing Generators. along with 1 NGR + 1 NGS Panel. |
| 61 | Roomi Fabric | Textile Mills | Generator Synchronization & Control Panel for 1x G3520H Caterpillar Gas Genset rated 3000KVA at 11KV, 50Hz, we used Deepsea 8610 Genset Controller Module where application is to run engine in baseload & loadsharing mode with existing Generators. along with 1 NGR + 1 NGS Panel. |
| 62 | Artistic Milliners Unit-3 | Textile Mills | "Design, Supply & Commissioned the 2 x PLC based Generator control and Synchronization Panel along with their MCC Panel for Caterpillar Gas Generator CG-170-20 rated 2441KVA at 400V, 50Hz. -Using DIEF (GCM-7) on each Generator for synchronization and Loadsharing with other Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Proface IPC for display Runtime data from Generator and field devices." |
| 63 | Anoud Power Generation Ltd. | Power Generation Company | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 11KV, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied NGR+NGS Panel." |
| 64 | Magna Processing | Textile Mills | Control Panel for 1x CG170-16 Caterpillar Gas Genset rated 1950KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. We also supplied utility control panel for back synchronization and Grid parallel operation. |
| 65 | Ismail Industries (Astro Packaging) | Packaging Industries | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Guascar Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 66 | Al-Rahim Textile Mills | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 67 | AJK Textile | Textile Mills | Control Panel for 2x CG 170-20 Caterpillar Gas Genset rated 2500KVA at 400V, 50Hz, application is to run engine in island operation mode as prime power. |
| 68 | Azgard Nine Limited | Textile Mills | Siemens IPC & PLC based Control Panel for 2x CG 170-20 Caterpillar Gas Genset rated 2500KVA at 400V, 50Hz, we used Sices GC-600 Genset Controller Module where application is to run engine in baseload & loadsharing mode with existing Generators. |
| 69 | Ismail Industries (Candyland) | Food & Beverages | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Guascar Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 70 | Mahmood Textile Mills | Textile Mills | Generator Synchronization & Control Panel for 3x G3520H Caterpillar Gas Genset rated 3125KVA at 11KV, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. along with 1 NGR Panel. |
| 71 | Popular Fibre Mills | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Engine. -Using Wago PLC (750-881) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 72 | Din Textile Mills Ltd. | Textile Mills | Siemens PLC & IPC based Generator Synchronization & Control Panel for 1x CG170-16 Caterpillar Gas Genset rated 1950KVA at 400V, 50Hz, we used Deepsea 8610 Genset Controller Module where application is to run engine in baseload & loadsharing mode with existing Jenbacher Generators. We also supplied locally manufactured Engine Auxiliaries Generator Synchronization & Control Panel (MCC Panel). |
| 73 | Eastern Spinning Mills | Textile Mills | Control Panel for 2x CG170-16 Caterpillar Gas Genset rated 1950KVA at 400V, 50Hz, application is to run engine in baseload & loadsharing mode with existing Generators. |
| 74 | Artistic Milliners Unit-5 | Textile Mills | "Design, Supply & Commissioned the 2 x PLC based Motor Control Center Panel for the Auxiliaries of Genbacer Generators. -Using Siemens PLC (S7-1200) for controlling the start stop of engine auxiliaries and 3-Way Valve of Heating Cooling line. -Using 12""inch Siemens HMI (TP Comfort 1200) for Controlling and display the Run, Stop and Trip indication of each auxiliaries also some sensor data from field devices." |
| 75 | Artistic Milliners Unit-15 | Textile Mills | "Design, Supply & Commissioned the 1 x PLC based Motor Control Center Panel for the Auxiliaries of Genbacer Generators. -Using Siemens PLC (S7-1200) for controlling the start stop of engine auxiliaries and 3-Way Valve of Heating Cooling line. -Using 12""inch Siemens HMI (TP Comfort 1200) for Controlling and display the Run, Stop and Trip indication of each auxiliaries also some sensor data from field devices." |
| 76 | Habib ADM | Food & Beverages | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-20 rated 2441KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 77 | Diamond International Textile Mills | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-20 rated 2441KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 78 | PAK Petro Chemical Pvt. Ltd | Others | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-132-16 rated 1000KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Guascar Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 79 | Naveena Textile Mills (Karachi) | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 80 | Hilal Foods Ltd. | Food & Beverages | "Design, Supply & Commissioned the 2 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520E rated 3125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 81 | Thar Coal - Master panel | Power Generation Company | Siemens PLC & Industrial HMI based Master Panel for 10MWM plant on HFO based Caterpillar Generators . Master Panel has provision for Load sense , load Demand Management, load shedding Management and controlling for 1 Neutral Grounding Resistor (NGR) and 4 x Neutral Grounding Switches (NGS) along with supply. Master panel is also including Auto Fuel Filling management. |
| 82 | Thar Coal - Power Panel | Power Generation Company | Design, Supply & Commissioning of Power Switchgear for 400V Distribution System with 2x 1250A TP Motorized ACB with 2500A Main BUSBAR and MCC Control Panel for Emergency Diesel Genset. |
| 83 | LUMS | University, Hospital & Shoping Malls | Siemens IPC & IPC based Control Panel for 1x CG170-16 Caterpillar Gas Genset rated 1950KVA at 11KV, 50Hz, we used Deepsea 8610 Genset Controller Module where application is to run engine in baseload & loadsharing mode with existing Generators. along with 1 NGR + 1NGS Panel. |
| 84 | Ecolean | Packaging Industries | Control Panel for 1x D3512B Caterpillar Gas Genset rated 1500KVA, 1200kW at 11KV, 50Hz, + Control Panel for 1x D3516B Caterpillar Gas Genset rated 2000KVA, 1600KW at 11KV, 50Hz application is to run engine in baseload & loadsharing mode with existing Generators. along with 2 NGR + 2NGS Panel along with Master Panel for Load sense load Demand Management, load shedding Management, forward & back synchronization with Grid. |
| 85 | Shan Foods Pvt Ltd. (Mehrunnisa Site) | Food & Beverages | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Waukesha (VHP5904LTD) Gas Generator rated 1125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Genbacer and Waukesha Gas Engine. -Using Allen Bradley PLC (Micrologix 1000) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 7""inch Allen Bradley HMI (Panel View 1000) for display Runtime data from Generator and field devices." |
| 86 | Luck Energy Pvt. Ltd | Power Generation Company | "Design, Supply & Commissioned the 2 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-260-16 rated 5250KVA at 11000V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. -We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel) and Singapore manufactured NGR & NGS Panel." |
| 87 | Lucky Energy - Master Control | Power Generation Company | Enercon supplied Siemens PLC & 15 inch Industrial Human Machine Interface (IPC) based Master Panel for Load sense load Demand Management, load shedding Management, Neutral Grounding Resistor Controlling, Steam monitoring, centralized monitoring of 36MW plant. |
| 88 | Rajby Textiles Pvt Ltd | Textile Mills | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using ComAP IGNT-GC for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 89 | Macpac Films Limited | Packaging Industries | "Design, Supply & Commissioned the PLC based Generator control and Synchronization Panel for Waukesha (VHP5904LTD) Gas Generator rated 1125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Genbacer and Waukesha Gas Engine. -Using Allen Bradley PLC (Micrologix 1000) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 7""inch Allen Bradley HMI (Panel View 1000) for display Runtime data from Generator and field devices." |
| 90 | Naveena Exports Lahore | Textile Mills | "Design, Supply & Commissioned the 2 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-170-16 rated 1950KVA at 400V, 50Hz. -Using Sices GC600 for synchronization and Loadsharing with existing Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel)." |
| 91 | Pak Denim Ltd. | Textile Mills | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. -We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel) and Power panel with imported Busbars." |
| 92 | Gatro Power (Private) Limited | Power Generation Company | "Design, Supply & Commissioning of 2 x PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator CG-260-16 rated 5250KVA at 11000V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices. -We also supplied locally manufactured Engine Auxiliaries Control Panel (MCC Panel) and Singapore manufactured NGR & NGS Panel." |
| 93 | Tata Textile Mills Limitied | Textile Mills | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using Sices (GC-600) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 94 | Indus Dyeing & Manufacturing Company Limited | Textile Mills | "Design, Supply & Commissioning of PLC based Generator control and Synchronization Panel for Caterpillar Gas Generator G3520H rated 3125KVA at 400V, 50Hz. -Using DIEF (GCM-7) for synchronization and Loadsharing with existing CAT Gas Engine. -Using Siemens PLC (S7-1200) for controlling engine auxiliaries, start stop sequence, mode switching and data acquisition from Modbus devices. -Using 15""inch Simatic IPC (with Wincc Runtime) for display Runtime and Historical data from Generator and field devices." |
| 95 | Dolmen City Towers (Clifton) | University, Hospital & Shopping Malls | "Design, Supply & Commission Control Panels for 3 x G3516C Caterpillar Gas Genset rated 2500KW at 11kV and Control Panels for 2 x D3512 Caterpillar Diesel Genset rated 1500kW at 400V. We also supplied singapore manufactured Master Panel for Tower A & Tower B , to manage & control Power Sources between Utility Grid & Self Generation. " |